Location & approach

By Car

The campus of the Technical University of Dortmund is located near the freeway junction Dortmund West, where the Sauerland line A45 crosses the Ruhr expressway B1/A40. The Dortmund-Eichlinghofen exit on the A45 leads to the South Campus, the Dortmund-Dorstfeld exit on the A40 leads to the North Campus. The university is signposted at both exits.

By bus and train

The "Dortmund Universität" S-Bahn station is located directly on the North Campus. From there, the S-Bahn line S1 runs every 15 or 30 minutes to Dortmund main station and in the opposite direction to Düsseldorf main station via Bochum, Essen and Duisburg. In addition, the university can be reached by bus lines 445, 447 and 462. Timetable information can be found on the homepage of the Rhine-Ruhr Transport Association, and DSW21 also offer an interactive route network map.

The H-Bahn

One of the landmarks of the TU Dortmund is the H-Bahn. Line 1 runs every 10 minutes between Dortmund Eichlinghofen and the Technology Center via Campus South and Dortmund University S, while Line 2 commutes every 5 minutes between Campus North and Campus South. It covers this distance in two minutes.

By Airplane

From Dortmund Airport, the AirportExpress takes just over 20 minutes to Dortmund's main train station, and from there, the S-Bahn takes you to the university. A wider range of international flight connections is offered by Düsseldorf Airport, about 60 kilometers away, which can be reached directly by S-Bahn from the university's train station.

ServicePortal UniMail

Contrast

Location & approach

By Car

The campus of the Technical University of Dortmund is located near the freeway junction Dortmund West, where the Sauerland line A45 crosses the Ruhr expressway B1/A40. The Dortmund-Eichlinghofen exit on the A45 leads to the South Campus, the Dortmund-Dorstfeld exit on the A40 leads to the North Campus. The university is signposted at both exits.

By bus and train

The "Dortmund Universität" S-Bahn station is located directly on the North Campus. From there, the S-Bahn line S1 runs every 15 or 30 minutes to Dortmund main station and in the opposite direction to Düsseldorf main station via Bochum, Essen and Duisburg. In addition, the university can be reached by bus lines 445, 447 and 462. Timetable information can be found on the homepage of the Rhine-Ruhr Transport Association, and DSW21 also offer an interactive route network map.

The H-Bahn

One of the landmarks of the TU Dortmund is the H-Bahn. Line 1 runs every 10 minutes between Dortmund Eichlinghofen and the Technology Center via Campus South and Dortmund University S, while Line 2 commutes every 5 minutes between Campus North and Campus South. It covers this distance in two minutes.

By Airplane

From Dortmund Airport, the AirportExpress takes just over 20 minutes to Dortmund's main train station, and from there, the S-Bahn takes you to the university. A wider range of international flight connections is offered by Düsseldorf Airport, about 60 kilometers away, which can be reached directly by S-Bahn from the university's train station.

ServicePortal UniMail

Lecture

Simulation dynamischer Prozesse

Type	Lecture (1 SWS) + Exercise (2 SWS)
Credits	3.5
Rhythm	Winter Semester
Bachelor / Master	Master
Audience	CIW, BIW
Language	German
LSF number	061070
Moodle Room

Course Content

In the course "Simulation dynamischer Prozesse", basic knowledge of the dynamic simulation of complex processes is imparted using the example of a complete process. Theoretical basics of steady-state and dynamic simulation and modeling as well as systematic procedures for application are presented. The structure and syntax of the commercial software gPROMS will be presented and acquired in exercises. The exercises will focus on setting up models for the individual unit operations, balancing the components, linking the individual models to the overall process, and interpreting the simulation results in terms of process engineering perspective.

Aquired Competences

Students will be able to set up and expand model equations for a unit operation and process engineering operations with given assumptions for both steady-state and time and multidimensional differential equations. They can implement the equations in the program gPROMS. Furthermore, they can interpret error logs of the program and correct the respective errors. They are also able to connect different models with each other in order to interpret a process engineering overall process and to simulate it as a result of a schedule.

Further Details

Exam	Written - 120 min
Preliminaries	-
Literature	The slides of the course and any additional materials such as literature lists and website recommendations will be published in the virtual workrooms in Moodle provided for this purpose. Details will be announced at the beginning of the course.

Only the information found in the LSF and the most recent edition of the Modulhandbuch der Fakultät Bio- und Chemieingenieurwesen is binding. The content on this page may not reflect the most up-to-date information.